MSRP: $74.95
Price: $69.95
You Save: $5.00 (7%)
6 volt motor has a 1/4" diameter shaft to fit most early applications. Comes with a sleeve to increase diameter to 5/16". Motor is reversible. Shaft length 1 13/16" Body length 3 3/4" Body diameter 3" Case bolts 2 5/16" center to center.
|
MSRP: $69.95
Price: $64.95
You Save: $5.00 (7%)
12 volt motor has a 1/4" diameter shaft to fit most early applications. Comes with a sleeve to increase diameter to 5/16". Motor is reversible. Shaft length 1 13/16" Body length 3 3/4" Body diameter 3" Case bolts 2 5/16" center to center.
|
MSRP: $69.95
Price: $59.95
You Save: $10.00 (14%)
12 volt motor has a 5/16" diameter shaft to fit many applications. Motor is reversible. Shaft length 1 13/16" Body length 3 3/4" Body diameter 3" Case bolts 2 5/16" center to center.
|
MSRP: $19.95
Price: $14.95
You Save: $5.00 (25%)
Opens and closes flow of hot water to the heater core. Has 5/8" necks. Installs in the heater inlet hose. (Usually the hose from the intake manifold to the heater core). Requires use of a cable to operate.
|
MSRP: $99.95
Price: $89.95
You Save: $10.00 (10%)
Attaches to the 9102 "Dual Slab" heater core used on various Chrysler products from the mid 60's.
|
MSRP: $295.00
Price: $249.95
You Save: $45.05 (15%)
Fits various Chrysler products with factory A/C from the mid 60"s including Charger, Coronet, etc.. Has three heater necks and requires use of heater control valve. Valve is available separately.
|
|
|
MSRP: $29.95
Price: $24.95
You Save: $5.00 (17%)
This cable can be used to open and close a cable operated heater control valve. It measures approximately 50" long and comes with an "L" bracket for easy mounting.
|
MSRP: $595.00
Price: $475.00
You Save: $120.00 (20%)
7 3/4" outer diameter, 4 3/8" inside diameter 2 1/4" thick 1/2" diameter necks Comes with new mounting clips.
|
MSRP: $595.00
Price: $450.00
You Save: $145.00 (24%)
7 3/4" outside diameter 4 3/8" inside diameter 3" thick 1/2" diameter necks
|
MSRP: $575.00
Price: $450.00
You Save: $125.00 (22%)
7 3/4" outside diameter 3 " inside diameter 2 3/4" thick Comes with new clips. Has 1/2" diameter heater necks
|
MSRP: $15.95
Price: $11.95
You Save: $4.00 (25%)
A bare bones way to shut off flow to the heater core in warm weather. Has 5/8" hose fittings.
|
MSRP: $278.05
Price: $224.95
You Save: $53.10 (19%)
This heater installs easy and works great. Measuring 10" wide, 9" deep and 5" tall it won"t take up much room. Comes with 3 speed fan switch, inline fuse and neccesary wiring.
|
MSRP: $71.53
Price: $49.95
You Save: $21.58 (30%)
The Mojave Plenum attaches to the front of the Mojave heater to provide directional control of the hot air and also provides a flange for attaching a defroster hose. Only adds an additional 4 1/2" to the depth of the Mojave Heater.
|
MSRP: $695.00
Price: $545.00
You Save: $150.00 (22%)
7 3/4" outside diameter, 4 3/8" inside diameter, 3" thick 1/2" diameter necks Fits various Triumph models
|
MSRP: $695.00
Price: $545.00
You Save: $150.00 (22%)
7 3/4" outside diameter, 4 3/8" inside diameter, 4" thick 1/2" diameter necks Fits various Triumph models
|